Main Distribution Board is a panel from where electrical energy is taken out to distribute power to various consumer points. It typically has a single or multiple incoming power sources and includes circuit breakers and protection devices. MDB then feeds SMDBs, which is installed generally at the point where a large distribution cable terminates and several smaller sub-circuits start. The SMDB feeds the Final Distribution Board, which then feeds electrical energy to the end user.
Motor Control Centre Panels are reliable and sturdy. Designs are available in both Modular and Fixed Type. Designing Intelligent Motor Control Centers to control electric motors and other equipment from a central location or where power is to be distributed for different equipment’s, safely and reliably. The Motor Control Center (Fixed & Fully Draw Out Type) can also house equipment such as variable speed drives, soft starters, programmable logic controllers, power quality meters and other protection devices. In the case of electrical faults, it allows maintenance personnel to quickly detect which protective device has tripped and then correct the problem.
Panels are totally dust and vermin proof. It can be fixed or draw out type as per demand. The panels are pretreated to decrease water rinsing & de-rusting/ phosphating. As per requirement it can be synthetic enamel painted or powder coated. Bus Bars & Internal Wiring Uniform cross section copper Bus Bars (current density 1.39 amps/sq mm.) which is supported by SMC /DMC bases will be employed throughout the length of the panel. Internal wiring are carried out with 11000/650 volt grade PVC insulated stranded conductor wire. All joints will be solidly crimped using copper thimbles and Earthing Bus Bars will be running all along the board. Switch Gears Component details along with the formal offer, GA drawing and bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel. Our Panels confirms to the standards, IS 4237; IS 8623; IS 375.